Skip to content
CurriculumToolsLibraryCommunitySign in
Join the community

Curriculum/Part IV: Source/Find

Lesson 4.2.1

Public Data First

The sector-to-database map: state licensing boards for the trades, federal carrier registries for trucking, provider registries for healthcare, contract award data for government services, plus secretary of state records and trade directories. Most of your list exists in the public record.

Lesson 3 of 10 in this part · 7 minute read · Draft, under review

Short answer

What public records can I use to find businesses to buy?

Start with the record that regulates your industry: state contractor licensing boards for trades, the federal motor carrier registry for trucking, the NPI registry for healthcare practices, SAM.gov and USAspending.gov for government contractors, and the secretary of state for almost any business. These often name the person legally responsible. Pay for data only to fill gaps.

Before you spend a dollar on lists, open the public record. Governments license, register, inspect and pay businesses, and most of what they collect is public. For many industries a self-funded buyer wants, the state or federal government already maintains a list of every company in the field, with a legal name, an address, and often the name of the person legally responsible for it. This lesson is the map from industry to database, and the method for turning a government search page into rows in your spreadsheet.

Principle

Most of your list already exists in the public record. Start there, and pay for data only to fill gaps.

Public data has three advantages over commercial listings. It is cheap or at no cost. It is authoritative: a license or a state filing is a legal record, not a marketing claim. And it frequently names a person: the registered agent, an officer, the licensed qualifier, the authorized official. That person is often the owner, which is what you need for outreach.

It also has limits you must respect. Records lag reality: a business can close and stay "active" on a registry for months. Registered agents are often a law firm or a commercial agent service, not the owner. Coverage depends on regulation: an unlicensed trade has no licensing board. And every database has its own terms of use. Use public data the way it is offered: search pages for searching, published downloads for bulk, and never in a way the site prohibits.

The sector-to-database map

Find your industry, then find the record that regulates it. The common pairings:

Industry Primary public database What it typically gives you
Construction trades (HVAC, plumbing, electrical, roofing, general contractors) Your state contractor licensing board, plus any city or county trade licenses License holder, license class, issue date, status, address; often the qualifying individual. Some states publish downloadable license lists.
Trucking and freight The federal motor carrier registry run by the Federal Motor Carrier Safety Administration (the SAFER company snapshot, by USDOT number) Legal and doing-business-as names, address, phone, number of power units (trucks) and drivers, safety record
Healthcare practices (dental, physical therapy, home health, clinics) The National Provider Identifier (NPI) registry, run by the Centers for Medicare and Medicaid Services, plus state professional boards Organization name, address, specialty taxonomy, and for organizations an authorized official with name and title
Government services contractors SAM.gov registrations and USAspending.gov award data Registered entities and their points of contact; every federal award by recipient, agency and amount
Professional services (accounting, engineering, law, insurance) State licensing boards for the profession (board of accountancy, engineering board, insurance department) Licensee, firm registration, status, address
Food service and bars State liquor licensing and county health department permits Licensee or permit holder, location, license type
Childcare and education State childcare licensing agency Facility, licensee, capacity, inspection history
Light manufacturing and industrial EPA facility registries and OSHA establishment inspection records Facility name and location, permit and inspection history
Almost any business Secretary of state business entity search Legal name, entity type, status, formation date, registered agent, principal address; in many states the officers or managers on the annual report

Two cross-industry sources are worth knowing:

  • County fictitious business name (DBA) filings. When a business trades under a name different from its legal name, the county clerk often has the filing, with the registrant's legal name.
  • SBA loan data. The SBA publishes loan-level data for its 7(a) and 504 programs (Y1), searchable by state and industry code. It is a size and financing signal, and a business that borrowed recently is a different conversation from one that never has.

Then add the non-government directories: the member directory of your industry's trade association (often by state chapter), regional "best of" and top-company lists in trade publications, and local chambers of commerce. These are not public records, but they are published lists of exactly the businesses you want, and membership itself is a signal of an established company.

Size from public clues

Revenue is almost never public for a private company. You estimate size from what is visible, and you write down which clue you used:

  • Trucking: number of power units and drivers.
  • Healthcare: number of individual providers associated with the practice's address.
  • Contractors: license classes held, number of licensed employees, bond amount where published.
  • Any employer with a retirement plan: the participant count on its annual Form 5500 filing, searchable on the Department of Labor's site.
  • Government contractors: award history on USAspending.gov.

These are proxies, not facts. Use them to rank, never to price.

Case

Coastal Comfort HVAC is the fictional company used throughout this curriculum. Here is how its row was built entirely from public records, before anyone marketed it.

Your buy box: Florida services businesses, $2 million to $8 million of revenue, owner-operated, ten or more years in business. HVAC is a licensed trade in Florida, so the state's contractor licensing records are the primary database. You filter for active mechanical and air-conditioning contractor licenses in your target counties and record each license holder.

For one license holder, the trail reads:

  1. State contractor license, first issued in 1994, to a Ray Delgado. That is the age proxy: a license more than thirty years old puts the holder in his fifties or sixties.
  2. Secretary of state filing for Coastal Comfort HVAC, LLC, formed March 2009, principal address in Palm Bay. Ray is the manager on the annual report. A second family name appears on administrative filings.
  3. No second licensed qualifier on the company's record. That matters. A contractor license belongs to a person, not the company, and it does not transfer when the business is sold. Many states, Florida among them, let a company contract only through a licensed individual who qualifies it, so if the owner is the only qualifier, the business may not be able to keep contracting once he leaves unless someone else licensed steps in. The rules differ by state; read your state board's. It is an early owner-dependency signal (RF-04) and a licensing question (RF-03).
  4. Industry code 238220, plumbing and HVAC contractors.
  5. Size clue: fleet and headcount visible on the company's own site and listings (about 36 people) put it in a $5 million to $8 million revenue band. Labelled as an estimate.
  6. County permit records show the 41-unit Harbor Pointe townhome project in 2025: a large, one-time commercial job.

None of that required the seller's cooperation, a broker or a paid data source. Item 6 became the most important fact in the deal: when the broker's book later claimed a record year, you already knew one project explained much of it.

Steps

1. Write down your industry code and your regulator

Look up the six-digit NAICS code (North American Industry Classification System, the government's industry numbering) for your target industry on the Census Bureau's NAICS site. Then answer: who licenses, registers or pays businesses like this in my state? If the answer is nobody, your primary database is the secretary of state plus directories.

2. Find your state's databases

Search for your state's contractor board, professional boards, or agency by name. Several university library guides keep indexes of state licensing databases by profession; use one to find the portal for your industry.

3. Check for a bulk download before you search one record at a time

Many agencies publish their whole list as a downloadable file, or provide one on request, sometimes for a fee. Federal sources (the motor carrier census, the NPI file, USAspending, SBA loan data) publish bulk files. A download turns weeks of copying into an afternoon of filtering. If no download exists, search by county or city and copy results into your spreadsheet within the site's terms.

4. Filter to your buy box in the spreadsheet

Filter by status (active only), geography, license class or industry code, and age (license or formation date ten or more years ago, if tenure is in your buy box). Remove obvious misfits: national chains, franchises if they are outside your thesis, entities with a commercial agent and no named person.

5. Cross-reference to the secretary of state

For every surviving row, look up the legal entity. Record formation date, status, principal address, and any named officers or managers. Search under the legal name, not just the trade name; the everyday name and the registered name often differ. One pattern in the interview corpus of 60+ failed and struggling buyers is a search run under the wrong version of a name that missed what the right version would have shown. Make the habit now.

6. Add directories last

Pull the trade association's member list for your state and any regional top-company list. Add the companies you do not already have, tagged with their source.

7. Record provenance on every row

Every row shows which database produced it, the date you pulled it, and the identifier (license number, USDOT number, NPI, entity number). Identifiers let you re-check status in one search before you reach out, and again before you sign anything.

Deliverable

A data-source map for your buy box, one page, plus the first public-data pull in your tracker:

  • Your NAICS code or codes and your target geography.
  • Each public database you will use: name, what it gives you, how you query it (search page, bulk download, request), and its terms of use in one line.
  • The size clue you will use for this industry, labelled as a proxy.
  • The trade associations and directories you will add.
  • At least 50 rows pulled from your primary public database, filtered to your buy box, with source, identifier and pull date on every row.

This lesson is education, not legal advice. Public records are subject to their publishers' terms of use and to state privacy and marketing laws; confirm both before you use any database for outreach.

Common questions

Asked about this lesson

How do I find the owner of an LLC in public records?

Look up the legal entity in the secretary of state business search, which shows formation date, status, registered agent and, in many states, the officers or managers on the annual report. Search under the legal name, not just the trade name. The registered agent is often a law firm or a commercial agent service, not the owner.

How can I estimate the size of a private company from public data?

Revenue is almost never public, so use visible clues: power units and drivers for trucking, individual providers at a practice's address for healthcare, license classes and licensed employees for contractors, participant counts on a Form 5500 for employers with a retirement plan, and award history for government contractors. These are proxies. Use them to rank, never to price.

Is SBA loan data public?

Yes. The SBA publishes loan-level data for its 7(a) and 504 programs, searchable by state and industry code. For a buyer it is a size and financing signal, and a business that borrowed recently is a different conversation from one that never has.

Can I download a list of licensed contractors in my state?

Often. Many agencies publish their whole list as a downloadable file or provide one on request, sometimes for a fee, and federal sources publish bulk files. Check for a download before searching one record at a time. If none exists, search by county or city and copy results within the site's terms of use.

More answers on the buyer FAQ.

Sources

From the Library

  1. Y1

    U.S. Small Business Administration (1991). 7(a) and 504 FOIA loan-level data. SBA Open Data, identifier SBA-OHA-2016-08-001.